Alco presents the look of Navona travertine with all the advantages of a glazed porcelain. A clean look in good colors at a competitive price, Navona is about uncomplicated elegance.
AONA--/2213 x 13 (8 mm)
20 x 20 (9.5 mm)
2 x 2 Mosaic
Note the difference in thickness between the 13x13 and 20x20. This should be considered when combining the two sizes; it can often be worked out by the installer.
The surface bullnose is made from field tile that is cut, ground and reglazed.
AONA--/SBN3 x 13 Surface Bullnose
Expect variation in color and size between field and trims.
AONA--/AC11313” Quarter Round
Navona is suitable for use on walls, counters and residential to moderate duty commercial floors.
Although subtly shaded, there is a lot of graphic variation and the graphics are mixed and packed randomly. It is important to pull from multiple boxes during installation, rotate pieces and note the placement of the different images in order to get the proper final blend.
This is a non-rectified tile. A minimum 1/8” grout joint is recommended.
The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.